HS Codes - 72: Iron and steel:

Pig iron and spiegeleisen in pigs, blocks or other primary forms:

Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus

Ferroalloys:

Containing by weight more than 2 percent of carbon:

Ferrosilicon:

Other

Ferrochromium:

Other:

Ferronickel

Ferrotungsten and ferrosilicon tungsten

Ferrotitanium and ferrosilicon titanium

Ferroniobium:

Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:

Other

Waste and scrap of cast iron

Of stainless steel

Waste and scrap of tinned iron or steel

Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

Remelting scrap ingots

Granules

Of alloy steel

Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):

Other

Containing by weight less than 0.25 percent of carbon:

Other, of rectangular (other than square) cross section

Containing by weight 0.25 percent or more of carbon

In coils, not further worked than hot-rolled, with patterns in relief:

Of a thickness of 4.75 mm or more:

Of a thickness of less than 3 mm

Of a thickness exceeding 10 mm

Of a thickness of 3 mm or more but less than 4.75 mm

Not in coils, not further worked than hot-rolled, with patterns in relief:

Of a thickness exceeding 10 mm

Of a thickness of 3 mm or more but less than 4.75 mm

Other

In coils, not further worked than cold-rolled (cold-reduced):

Of a thickness exceeding 1 mm but less than 3 mm

Of a thickness of less than 0.5 mm:

Of a thickness of 3 mm or more

Of a thickness of 0.5 mm or more but not exceeding 1 mm

Other

Plated or coated with tin:

Of a thickness of less than 0.5 mm

Electrolytically plated or coated with zinc

Corrugated

Plated or coated with chromium oxides or with chromium and chromium oxides

Plated or coated with aluminum-zinc alloys

Painted, varnished or coated with plastics:

Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:

Universal mill plate

Other:

Containing by weight less than 0.25 percent of carbon:

Other

Plated or coated with tin

Otherwise plated or coated with zinc:

Otherwise plated or coated

Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:

Other, of free-cutting steel

Of circular cross section measuring less than 14 mm in diameter:

Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:

Concrete reinforcing bars and rods

Other:

Other

Of free-cutting steel, not further worked than cold-formed or cold-finished

Other:

U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm

L sections

U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:

I sections (standard beams)

L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more

Angles, shapes and sections, not further worked than cold-formed or cold-finished:

Other

Cold-formed or cold-finished from flat-rolled products

Wire of iron or nonalloy steel:

Plated or coated with zinc:

Other:

Ingots and other primary forms

Of rectangular (other than square) cross-section

Flat-rolled products of stainless steel, of a width of 600 mm or more:

Of a thickness exceeding 10 mm

Of a thickness of 3 mm or more but less than 4.75 mm

Not further worked than hot-rolled, not in coils:

Of a thickness of 4.75 mm or more but not exceeding 10 mm

Of a thickness of less than 3 mm

Of a thickness of 4.75 mm or more

Of a thickness exceeding 1 mm but less than 3 mm

Of a thickness of less than 0.5 mm

Flat-rolled products of stainless steel, of a width of less than 600 mm:

Of a thickness of 4.75 mm or more

Not further worked than cold-rolled (cold-reduced):

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel

Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:

Other

Other bars and rods

Wire of stainless steel:

Ingots and other primary forms

Flat-rolled products of other alloy steel, of a width of 600 mm or more:

Grain-oriented

Other, not further worked than hot-rolled, in coils:

Other, not further worked than cold-rolled (cold-reduced):

Electrolytically plated or coated with zinc

Other

Of silicon electrical steel:

Other:

Other:

Not further worked than cold-rolled (cold-reduced):

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:

Of silico-manganese steel

Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

Bars and rods, of silico-manganese steel:

Of tool steel (other than high-speed steel):

Other bars and rods, not further worked than cold-formed or cold-finished:

Angles, shapes and sections:

Wire of other alloy steel:

Other: